Ways to sew on badges manually or by machine

When you want to spice up a piece of clothing, accessory, luggage piece or even hats you can easily sew on badges to have the fresh look easily veterinariansite. Badges or patches when placed strategically can immediately change the look of a garment or accessory and take it from boring to spunky in just a few minutes. Should you have children and they keep earning badges of merit you would want to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy when you know the right way to get it done.

To do this process of sewing on a badge, begin with placing the badge to the place where you want it. Now secure the badge well with some pins so that it stays in place and doesn’t shift when you are sewing it on. So if you’re putting the patch on a garment, you have to fix the patch and after that try the garment on to make sure that the patch or the badge looks suitable in the place. If the patch requires a little readjustment you can do it at this stage easily.

Now thread the needle making sure that the thread you’re using isn’t very long. Keep the thread at a length of approximately 18inches for simple maneuvering. If your thread is simply too long then you might get bothered by knots. Once you’ve the thread ready create a knot at the end of the thread. You can actually thread a needle manually by holding the non knotted end between your forefinger and thumb after which passing it in the eye of your needle. It’s also possible to get the aid of a needle threader if you find threading a needle in such a manner difficult.

Pass the needle in the badge as well as the fabric being sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from which you started stitching keeping this distance from the last stitch at all times. Continue stitching around the entire perimeter of the badge till you have completed stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread using a single stitch. Pull the thread securely to secure the knot after which you can cut-off any excess thread which is left. Lastly remove the excess safety pins that you were using to secure the patch into position.

You may as well sew on badges by using a sewing machine if you don’t wish to do the same by hand. Decide on a thread that matched the colour of your patch after which you can tread your machine. You could also decide on a contrasting color depending on the look that you like to present your badge. Once this is successfully done you should start sewing you badge go to my blog. Take advantage of the surface of the badge as your starting position and sew all along the edge of your badge utilizing the regular stitch mode ending in your beginning point. Once done, cut any additional thread that connects the badge to the machine and your garment is ready for use with the badge.