When you want to spice up a garment, accessory, luggage piece or perhaps hats you could sew on badges to get the new look easily. Badges or patches when placed strategically can immediately alter the look of a garment or accessory and take it from boring to spunky in a matter of minutes. Should you have children and they keep earning badges of merit you would like to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy once you know how to get it done service dog.
To start this procedure of sewing on a badge, start by placing the badge over the place for which you desire it. Now secure the badge well with some pins so it stays in place and doesnâ€™t shift when you are sewing it on. If you are putting the patch over a garment, you must fix the patch and then try the garment on to be sure that the patch or the badge looks best suited in the place. If your patch needs a little readjustment you can do it at this time easily.
Now thread the needle making sure that the thread that you are currently using isnâ€™t too long. Keep the thread at a length of approximately 18inches for quick maneuvering. If the thread is too long then you might get bothered by knots. Once you have the thread ready make a knot at the end of the thread. You can thread a needle yourself by holding the non knotted end in between your forefinger and thumb after which passing it through the eye of the needle. It’s also possible to take the aid of a needle threader if you find threading a needle in this manner difficult.
Pass the needle in the badge and the fabric making sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you started stitching keeping this distance from the last stitch all the time. Continue stitching around the entire perimeter of the badge till you have completed stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by using a single stitch. Pull the thread securely to secure the knot and then cut off any excess thread that’s left. Lastly take off the excess safety pins that you were using to secure the patch in position custom badges.
It’s also possible to sew on badges through the help of a sewing machine if you donâ€™t want to do the same by hand. Pick a thread that matched the color of the patch after which tread your machine. You may as well choose a contrasting color with regards to the look that you like to present your badge. Once this is achieved you need to start sewing you badge. Take advantage of the top of the badge as your starting place and sew all across the edge of your badge using the regular stitch mode ending in your kick off point. Once done, cut the excess thread that connects the badge to the machine and your garment is ready for use together with the badge.